KYOCERA KM-P4850w Bedienungsanleitung PDF herunterladen (Seite 49)

CHAPTER 6 TROUBLESHOOTING

6-3

When toner is insufficient the message “Add toner” is displayed.

When “Ready to print” is also displayed, printing is possible for a short

period of time; however, when the only “Add toner” message is

displayed and the Attention indicator on the operation panel is lit,

printing is no longer possible. Replenish toner promptly.

When several consecutive prints contain large areas of saturated

black, large quantities of toner are used at once and the message

“Add toner” may be displayed even when a supply of toner remains in

the printer. In this case, open and then close the toner replenishing

slot. The printer will perform toner replenishment.

Inch specifications

Ready to print.

Add toner.

Metric specifications

Ready to print.

Add toner.

Turn the screws on both sides of the toner replenishing slot

and align them as shown to open the toner replenishing slot.

Grasp the replenishment toner bottle upside down and tap

the bottom of the bottle 10 times.

2. Replenishing the Toner

Shake the replenishment toner bottle up and down 10 times,

and grasp it horizontally and shake it side to side 10 times.

Align the ▼ portion of the toner bottle with the pin 1 (metal

protrusion) of the opening to insert the bottle as shown in the

illustration.

CAUTION

DO NOT attempt to incinerate the toner containers or

the waste toner tank. Dangerous sparks may cause

burns.

CAUTION

DO NOT attempt to force open or destroy the toner

containers or the waste toner tank.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

Keine Kommentare

KYOCERA KM-P4850w Bedienungsanleitung Seite 49