KYOCERA KM-P4850w Bedienungsanleitung PDF herunterladen (Seite 24)

CHAPTER 3 GETTING READY FOR PRINTING

3-6

2. Paper

(1) Paper Type

Note the following restrictions on paper that can be used in this

machine.

● Compatible paper

1. Paper source 1 (option), paper source 2, and paper source 3

• Paper roll width: 17" to 36" [210 to 920 mm]

• Paper roll outer diameter: 6 3/4" [180 mm] or less

• Paper roll inner diameter: 3" [76 mm (75.2 to 77.2 mm)]

• Acceptable paper roll types

Plain paper (64 to 80 g/m

)

Vellum

Film

2. Bypass

• Paper sizes (standard paper): 8 1/2" x 11" to 36" x 48"

[A4 portrait to A0]

• Paper width: 8 1/2" to 36" [210 to 920 mm]

• Paper length: 11" to 48" [297 to 1189 mm]

• Acceptable paper materials

Plain paper (64 to 80 g/m

)

Vellum

Film

● Unacceptable paper

• Paper other than the paper described in “● Compatible paper”

• Paper with staples, etc.

• If paper is wrinkled, folded or broken, unroll the paper until the

problem disappears and cut the paper before using it.

● Automatic paper width detection

If the paper roll that has been set is of a standard size, the paper

width will be automatically detected. The following sizes can be

detected.

NOTE

• Automatic detection will not function for the bypass.

• Paper width of non-standard sizes can be registered. See “1. Paper

width” in the default setting. (Page 5-6)

• For switching between standard sizes (architecture/engineering [A

sizes/ B sizes]), see “10. Standard size” in the default settings.

(Page 5-9)

● Storage of paper

If the machine is not used for an extended period time, remove the

paper roll and return it to its original packaging and reseal it.

IMPORTANT

• Vellum

Since vellum is very susceptible to its environment, when it is not

used, put it in a plastic bag and seal it.

• When using vellum at a high humidity or at a low temperature,

vellum will become fragile, resulting in wrinkles prints or missing

images. If images are not properly printed, perform the following

procedure.

* When using cut vellum:

Change the orientation of the paper (portrait or landscape).

* When using a vellum roll:

Unroll 1 length of paper and cut the paper before using it.

• When using roll paper whose surface is contaminated with

adhesive, remove the adhesive or unroll the paper until the adhesive

is no longer visible and cut off the unusable length.

Inch specifications

36"

24"

18"

12"

34"

22"

17"

11"

8 1/2"

Metric specifications

A0: 841mm

A1: 594mm

A2: 420mm

A3: 297mm

A4: 210mm

B1: 728mm

B2: 515mm

B3: 364mm

B4: 257mm

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

KYOCERA KM-P4850w Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Laser- / LED-Drucker KYOCERA KM-P4850w